EarShot IFB has four audio inputs (or feeds). Two of the feeds can be alternately configured as IFB inputs. Up to 30 callers can dial in and listen to audio from standard telephones. Callers can switch between the feeds using DTMF (Touch Tone) selection.
EarShot IFB features selectable feeds. Users can configure some feeds with full program audio, and implement mix-minus on other feeds to prevent echo and other audio flaws. This versatility makes it simple to tailor EarShot IFB to your needs.
EarShot IFB interfaces to Voice-over-IP (VoIP) telephone circuits using the SIP protocol. This makes it possible to replace up to 30 POTS lines with one simple box. EarShot IFB can handle 30 POTS calls or 10 wideband calls – users can also configure the box to handle a combination of each. VoIP phone lines can be delivered from cloud-based VoIP providers, VoIP-based PBXs (in many cases), and via hardware gateways devices that bridge legacy phone circuits (e.g. T1/E1, POTS) to VoIP.
Note: Integration with Cisco Unified Communication Manager (CUCM) is not supported for Comrex EarShot IFB.
EarShot IFB can interface to most normal calls using standard telephony audio encoding (G.711). EarShot IFB can also deliver audio to “pure” end-to-end VoIP callers with higher fidelity, using encoders like G.722 and Opus. A special app will be available to make high-fidelity connections easy.
Make wide-band calls to EarShot IFB easily with FieldTap. A free application for iOS and Android, FieldTap makes it simple to connect with the touch of a button. Plus, FieldTap is compatible with all Comrex IP audio codecs.
Need help with your product? Click below to find troubleshooting tips, new software, and technical support.Get Product Support
Looking to make a purchase? Click below to find an authorized Comrex dealer in your area.Find an Authorized Dealer